The bachelors's degree in Industrial Engineering at Tsinghua requires 170 credits totally, which include: spring & fall courses 142 credits, summer practicum 13 credits, and thesis project 15 credits. The 170 credits constitution is: General
The Master of Science degree in Industrial Engineering is offered to all students who finish the Industrial Engineering program usually in 2 years. Besides the required Master's thesis, the Industrial Engineering program requires 30 credits, con
The Philosophy of Doctor degree in Industrial Engineering is offered to all students who finish the Industrial Engineering program in at least 3 to 5 years.
PEOThe current PEO is:Employ industrial engineering theories, and analytical and management skills for incre
The Department of Industrial Engineering is devoted to solving efficiency, quality, cost and safety problems in industrial and service systems.
The challenges in contemporary society are mostly complicated system problems, such as management of global production networks, establishment of efficient public healthcare systems, construction of traffic and transport systems and their operation networks, and maintaining secured and effective energy supply systems. These challenges involve not only c
We apply state-of-the-art decision science and statistics knowledge to the development of the Chinese economy. To be specific, we use data-driven decision...
The Engineering system group in the Department of Industrial Engineering of Tsinghua University endeavors to improve understanding about the nature of operations in engineering systems, such as, production systems, service systems (logistics, healthcare,
Human Factor and Ergonomics studies the correlations and interactions between human, tool, machine and environment in system, and promote the total productivity of human-machine system as well as people's health, security and the quality of life.
The research centers at the department are platforms for the collaboration and communication between the department and industries. They serve through research, technology transfer, management consulting, and continuous education & training. Below are research centers run by the department:
The IE department has four laboratories: Human Factors Engineering Lab (HFEL), Logistics Engineering Lab (LEL), Production Engineering Lab (PEL), and Computing and Simulation Lab (CSL).
The department is well structured by a team of 30 highly qualified faculty members, including 7 full professors, 17 associate professors, and 6 assistant professors. The founding chaired professor and department head is Dr. Gavriel Salvendy, who is a prof
Dr. Gavriel Salvendy
Chair of the Review Board
University Distinguished Professor
University of Central Florida,and President Academy of Science, Engineering and Medicine of Florida
Member of National Academy of Engineering, US
Dr Hubertus ChristPresident of VDI ( Verein Deutscher Ingenieure,Germany)Time of appointment: 2002-2008Mr. Tome LeamonVi
[Time] 9:00-10:00, April 11 (Saturday), 2020
Lotus Pond Rain Classroom: W141WB
ZOOM ID: 660 896 190
Tencent ID: 526 217 861
[Speaker] Dr. Luyi Yang
[Title] A Model of Queue-Scalping
The department has one associate chair as the department-level student advisory board director. The board has an undergraduate branch and a graduate branch. Each branch is formed by class advisors, class assistants, student union, Youth League, and Science/Technology Association.
The IE department has eight undergraduate classes (each grade has two classes of about 70 students). Also we have two faculty members as the advisors for the freshmen, two for the sophomores, one for the juniors, and o
The students are required to participate in extracurricular activities in order to prepare themselves with not only knowledge in IE, but also Teamwork and interpersonal skills, Leadership, and Social responsibilities.
The university-level student advisor
The Bachelor program requires 173 credits, consisting of 136 credits in spring/fall semesters, 4 credits in senior projects, 18 credits in summer practice and military training, and 15 credits of a final thesis. The courses are classified into five categories: Humanities and Social Sciences, core engineering courses, core Industrial Engineering courses, summer practice and internship, and a thesis component.
International programs have been initiated since 2001 including the Tsinghua-Aachen joint master program and Tsinghua-Gatech exchange program. And a two-year, professional-orientated Master's program in Management Science and Engineering (Global Manufacturing) was founded in 2009 for students with a global vision in management science and engineering, with special focus on the manufacturing industry in China.
The doctoral degree program usually lasts 3 to 5 years. Students with Master's degree usually spend 3 to 4 years. The program has 22 credits consisting of 13 credits of core courses, and 5 credits of research requirements. Students without an IE related Master's degree shall take prerequisite courses suggested by the advisor.
Admissions to the International Program of Master of Engineering Management (iMEM)
Li Zheng received the B.S. and PhD. degree from Tsinghua University, China, in 1986 and 1991, He is currently an Professor in the Department of Industrial Engineering, Tsinghua University, China. He was a visiting Professor in Georgia Tech during 1994 – 1996. He has authored/coauthored over 200 publications, and Five book chapters. His research interests include production and operation planning and scheduling, production system analysis and information Driven manufacturing. He won several important award, such as, the National Science and Technology Progress Award in 2005, the National Invention Award in 1990, Excellence Young Faculty Award from MOE in 2000. Dr. Zheng is a member of the Institute of Industrial Engineers (IIE) and founding chair of IIE, China Chapter.
Journal Papers (International)
A study on calibration of coefficients in end milling forces model，Zhang, Zhihai; Zheng, Li; Zhang, Lei; Li, Zhizhong; Liu, Dacheng; Zhang, Bopeng，International Journal of Advanced Manufacturing Technology, v 25, n 7-8, April, 2005, p 652-662
Prediction of cutting forces in end milling of pockets， Zhang, Lei; Zheng, Li Source: International Journal of Advanced Manufacturing Technology, v 25, n 3-4, February, 2005, p 281-287
On the prediction of chip flow angle in non-free oblique machining，Wen, D.H.; Zheng, L.; Li, Z.Z.; Hu, R.S. Source: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, v 218, n 10, October, 2004, p 1267-1278
Prediction of cutting forces in milling of circular corner profiles, Zhang, Lei (Sch. of Mech. Sci. and Engineering, Nanling Campus, Jilin University); Zheng, Li Source: International Journal of Machine Tools and Manufacture, v 44, n 2-3, February, 2004, p 225-235
An improved chip flow model considering cutting geometry variations based on the equivalent cutting edge method, Wen, D.H. (Department of Industrial Engineering, Tsinghua University); Zheng, L.; Li, Z.Z.; Hu, R.S. Source: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, v 217, n 12, 2003, p 1737-1745
A solid model-based milling process simulation and optimization system integrated with CAD/CAM，Li ZZ, Zheng M, Zheng L, Wu ZJ, Liu DC, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY ，138: 513-517 Sp. Iss. SI JUL 20 2003
An investigation of cutting forces in horizontal-mode peripheral milling of curved surfaces，Zhang L, Zheng L, Zhang ZH，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE，217 (7): 961-976 2003
A cutting force model for a waved-edge end milling cutter，Zhang Z, Zheng L, Li Z, Liu D, Zhang L, Zhang B，INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY，21 (6): 391-396 2003
On cutting forces in peripheral milling of curved surfaces，Zhang L, Zheng L, Zhang ZH, Liu Y, Li ZZ，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE，216 (10): 1385-1398 2002
On the removal of material along a polishing path by fixed abrasives，Zhang L, Tam HY, Yuan CM, Chen YP, Zhou ZD, Zheng L，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE，216 (9): 1217-1225 2002
E-DREAM: A web-based platform for virtual agile manufacturing，Tang DB, Zheng L, Chin KS, Li ZZ, Liang YL, Jiang XJ, Hu CJ，CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS，10 (2): 165-183 JUN 2002
STEP-based Product Modeling for Concurrent Stamping Part and Die Development, Dunbing Tang, Li Zheng, Zhizhong Li, Computers in Industry, 2001.8, Vol. 46, Iss. 1; pg. 75
An intelligent feature-based design for stamping system, Dunbing Tang, Li Zheng, Zhizhong Li, International Journal of Advanced Manufacturing Technology, 2001 Volume 18, Issue 3, pp 193-200
Re-engineering the design process for concurrent engineering, Dunbing Tang, Li Zheng, Zhizhong Li, et al.,Computers & Industrial Engineering, 2000,38(4), 479-491
End Milling System Compliance and Machining Error, Machining Science and Technology, Liang, Steven; Zheng, Li, Vol.2,No.1, 1998
Analysis of End Milling Surface Error Considering Tool Compliance, Liang, Steven; Zheng, Li, Transaction of ASME, J. of Manufacturing Science and Engineering, Vol.120, No.1, 1998
Gerneralized Model of Milling Forces, Zheng, LI; Liang, Steven, Int. J. of Advanced Manufacturing Technology, Vol.14, No.3, 1998
Angle Domain Analytical Model for End Milling Forces, Zheng, LI; Liang, Steven, Transaction of ASME, J. of Manufacturing Science and Engineering, Vol.120,No.2, 1998
Identification of Cutter Tilt in End Milling, Zheng, LI; Liang, Steven, Transaction of ASME, J. of Manufacturing Science and Engineering,Vol.119,No.2,1997
Three Dimensional Cutting Force Analysis in End Milling, Zheng, LI; Liang, Steven, International Journal of Mechanical Science,1996/5,Vol38, No.5
Selected Journal Papers (Domestic, in Chinese)
The Yard-Controller Decision Making Support System in Technical Station based on Agent, ZD HE; L. ZHENG; ZH ZHANG; SD WANG; SC LIU, Railway Transport and Economy,2006.3
Design and Implementation of Agent-based Holonic Control System, P. ZHAO; L. ZHENG; DC LIU, MX PANG, Manufacturing Technology & Machine Tool, 2006-02
Ant colony optimization for the single machine early or tardy problem with distinct ready times, Y. SONG; ZH ZHANG; L. ZHENG, Journal of Tsinghua University(Science and Technology), 2005.11
EDM system design for Collaborative Design AmongEnterprises, XQ Yu, ZH Zhang, L. Zheng, CJ Hu, Computer Engineering and Application, 2005.10
Design in Large-scaled Logistics Networks Based on Combinatorial Genetic Algorithm, Q. TIAN; LX MIAO; L. ZHENG; ES QI, Logistics Technology, 2005.6
Remote Video Signal Process by using the effectiveness of monitoring information, CIMS, 2005.3
Process Based Performance Matrix for Manufacturing Industries, JR Zhu, DC LIU, W. Dong, L. Zheng, CIMS, 2005.3
Extracting Geometry Features in Ball End Milling Process Simulation, Y. Liu, ZZ Li, ZH Zhang, L. Zheng, Journal of Tsinghua Univesity, 2005.2
A Reliability Evaluation Method Based on failure date and statistics, YH Yang, ZZ Li, L. Zheng, Journal of System simulation, 2004.12
Design Methodology for Logistics Network by Using GA, Q. Tian, LX Miao, L. Zheng, Journal of Tsinghua University, 2004.11
Optimizing the Production Plan in Semiconductor Manufacturing, Q. Li, DC Liu, HZ Wang, L. Zheng, Manufacturing Technology and Machine Tool, 2004.11
Situation on Grid Research and Its Application in Manufacturing, B Yan, BQ Huang, L Zheng, TY Xiao, CIMS 2004.09
Analytical model to predict milling forces for arc curved surfaces, ZH Zhang, L. Zheng, L. Zhang, ZZ Li, Journal of Tsinghua University(Science and Technology), 2004.08
LP-based capacity planning in semiconductor manufacturing, Q LI; DC LIU; L. ZHENG; T. ZHANG, Semiconductor Technology, 2004.07
Research on Spares Management System with Simulation, YH Yan, JM Zhao, ZZ Li, L. Zheng, Acta Simulata Systematica Sinica, 2004.05
Solution framework for the large scale vehicle delivery/collection problem, ZW QU; LN CAI; C. LI; L. ZHENG, Journal of Tsinghua University(Science and Technology), 2004.5
A Study on a Integrated Framework of Information Modeling and Re-engineering for Design Process, CJ Hu, L. Zheng, ZZ Li, DB Tang, BP Zhang, China Mechanical Engineering, v 14, n 20, 2003.10
Wavelet-based fast modification of the free form surface of a soldier's helmet, Zhou, Hong; Li, Zhizhong; Jing, Yue; Liu, Hong; Zheng, Li; Huang, Xiancong; Bao, Yuanhui; Chen, Xiao, Journal of Tsinghua University, v 43, n 8, August, 2003
Industrial Engineering in the New Millennium, G. SALVENDY, L. ZHENG, XB ZHAO, Industrial Engineering and Management, 2002.03
A Web Based Agile Turning Parameter Planning System, XM Yang, L. Zheng, ZH ZhangXL Han, BP Zhang, China Mechanical Engineering, Vol.12, No.6, 2001.3
A Raference Framework for Concurrent Engineering, DunbingTang, Li Zheng, Zhizhong Li, Dacheng Liu, Hign Technology Letters, 2001, vol.7, No.1, pp.47-50
Virtual Machining Process: Concept, Method And Its Application, L. Zheng, DC Liu, ZZ Li, BP Zhang, CHINA MECHANICAL ENGINEERING, 1999.09
Selected Conference Proceedings
Zhang Lei, Zheng Li, Zhang Zhihai. Numerical model for cutting forces in peripheral milling of curved surfaces. Proceedings of IE&EM’2002 & IceCE’2002, Sept.19-21, 2002, Beijing, China.
Gao Benhe, Zheng Li,et al. A Research to the Stress Model of the Non-completely Chip-breaking in Vibration Drilling. Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, July, 2002, Printed by DUT Printing House, Dalian, China: 263~269.
Gao Benhe, Liu Dacheng, et al. Management Research and apply of the Quality Assurance System in CIM Environment, Proceedings of IE&EM'2002 and IceCE'2002, September, 2002, Tsinghua University Press, Beijing, China.
Zhao Daquan, Zheng Li, Liu Dacheng: The Application of Fuzzy Cluster Analysis in Identification of Characteristic Temperature in Machine Tool (RID: 265), Proceedings of IE&EM' 2002 and IceCE' 2002
Niansong ZHANG, Dacheng LIU,Li ZHENG, Bopeng ZHANG. Resource Recycling Strategy of the Household Refrigerators. Proceedings of IE&EM 2002, Sept. 19-21, 2002, Beijing, China.RID108.
Liu Shaogang, Zheng Li, Liu Dacheng, Li Zhizhong. Fixture Selection under Fuzzy Environment. Proceedings of IE&EM 2002, Sept. 19-21, 2002, Beijing, China.
Liu Shaogang, Zheng Li, Zhang Zhihai. A Fuzzy Multiple Attribute Decision-making Approach for Supplier Selection. Proceedings of IE&EM 2002, Sept. 19-21, 2002, Beijing, China.
Hu Changjian, Li Zhizhong , Zheng Li, Zhang Bopeng. A Virtual Clustering Mechanism for Agent, Proceeding of IE&EM'2002 and IceEM'2002. Sept. 19-21, 2002, Beijing, China.
Yin Liu, Li Zheng,The research on the extraction method of cutting engagement in ball-end milling simulation(Rid 264), Proceeding of IE&EM'2002 and IceEM'2002. Sept. 19-21, 2002, Beijing, China. pp175
Pan Chunfeng, Liu Dacheng, Lu Jun, Cheng Lihui, Zheng Li. An Application of Web-based Remote Monitor System. Proceedings of IE&EM’2002 & IceCE’2002, Sept.19-21, 2002, Beijing, China
Li Zhizhong, Zheng Li, Tang Dunbing, Hu Changjian, Liu Dacheng, Li Litao. Interoperable Software Component of a Rule-Based Inference Engine for Product Development Decisions. 1st International Conference on Mechanical Engineering, Nov. 20-22, 2000, Shanghai
Li Zheng, Dunbing Tang, Zhizhong Li, “Web-based Technologies Enabling Agile Manufacturing”, International conference on eCommerce Engineering: New Challenges for Global Manufacturing in the 21st century (ICECE’21), Xi’an, Sept. 2001
ZHAO Daquan, LIU Dacheng, ZHENG Li, LI Zhizhong, ZHANG Bopeng, XIANG Weihong. Determining thermal restraints exactly in analysis of thermal deformations of machine tool. Proceedings of the Ninth International Manufacturing Conference in China. August 16-17, 2000. Hong Kong. P.R.C.
Yanbo LIU, Dacheng LIU, Li Zheng, Ruying Pang. Automatic meters reading system of PSTN-based telecommunication. Proceedings of ICeCE 2001.2001 International Conference on eCommerce Engineering: New Challenges for Global Manufacturing in the 21st Century. RID04-30.Sept.16-18, 2001. Xi'an, P.R.China.
Pang Ruying, Liu Dacheng, Zheng Li. The construction of Web-based electronic product catalogs system. Proceedings of ICeCE 2001.2001 International Conference on eCommerce Engineering: New Challenges for Global Manufacturing in the 21st Century. RID04-28.Sept.16-18, 2001. Xi'an, P.R.China.
LI Zhizhong, ZHENG Min, ZHENG Li, WU Zhijun, LIU Dacheng. A Solid Model-Based Milling Process Simulation and Optimization System Integrated with CAD/CAM. Proc. Of IMCC'2000. 2000. HongKong.
Introduction to Standardization, CT LI ed. Chapter 16: Standardization and Mass customizations (in Chinese), 2005, People’s University Press
Li Zheng et al (Ed), "Strategic Production Network", Springer-Verlag, Berlin, Germany 2002
Li Zheng, DC Liu, ZZ Li, Virtual Manufacturing in Handbook of Modern Instrument, Science Press (in Chinese), 2003
BP Zhang, Li Zheng, et al, Advanced Manufacturing Technology, Post Press(in Chinese), 2003
Li Zheng, Ken Chen, BP Zhang, Manufacturing System, Tsinghua University Press(in Chinese), 2001