The bachelors's degree in Industrial Engineering at Tsinghua requires 170 credits totally, which include: spring & fall courses 142 credits, summer practicum 13 credits, and thesis project 15 credits. The 170 credits constitution is: General
The Master of Science degree in Industrial Engineering is offered to all students who finish the Industrial Engineering program usually in 2 years. Besides the required Master's thesis, the Industrial Engineering program requires 30 credits, con
The Philosophy of Doctor degree in Industrial Engineering is offered to all students who finish the Industrial Engineering program in at least 3 to 5 years.
PEOThe current PEO is:Employ industrial engineering theories, and analytical and management skills for incre
The Department of Industrial Engineering is devoted to solving efficiency, quality, cost and safety problems in industrial and service systems.
The challenges in contemporary society are mostly complicated system problems, such as management of global production networks, establishment of efficient public healthcare systems, construction of traffic and transport systems and their operation networks, and maintaining secured and effective energy supply systems. These challenges involve not only c
We apply state-of-the-art decision science and statistics knowledge to the development of the Chinese economy. To be specific, we use data-driven decision...
The Engineering system group in the Department of Industrial Engineering of Tsinghua University endeavors to improve understanding about the nature of operations in engineering systems, such as, production systems, service systems (logistics, healthcare,
Human Factor and Ergonomics studies the correlations and interactions between human, tool, machine and environment in system, and promote the total productivity of human-machine system as well as people's health, security and the quality of life.
The research centers at the department are platforms for the collaboration and communication between the department and industries. They serve through research, technology transfer, management consulting, and continuous education & training. Below are research centers run by the department:
The IE department has four laboratories: Human Factors Engineering Lab (HFEL), Logistics Engineering Lab (LEL), Production Engineering Lab (PEL), and Computing and Simulation Lab (CSL).
The department is well structured by a team of 30 highly qualified faculty members, including 7 full professors, 17 associate professors, and 6 assistant professors. The founding chaired professor and department head is Dr. Gavriel Salvendy, who is a prof
Dr. Gavriel Salvendy
Chair of the Review Board
University Distinguished Professor
University of Central Florida,and President Academy of Science, Engineering and Medicine of Florida
Member of National Academy of Engineering, US
Dr Hubertus ChristPresident of VDI ( Verein Deutscher Ingenieure,Germany)Time of appointment: 2002-2008Mr. Tome LeamonVi
[Time] 9:00-10:00, April 11 (Saturday), 2020
Lotus Pond Rain Classroom: W141WB
ZOOM ID: 660 896 190
Tencent ID: 526 217 861
[Speaker] Dr. Luyi Yang
[Title] A Model of Queue-Scalping
The department has one associate chair as the department-level student advisory board director. The board has an undergraduate branch and a graduate branch. Each branch is formed by class advisors, class assistants, student union, Youth League, and Science/Technology Association.
The IE department has eight undergraduate classes (each grade has two classes of about 70 students). Also we have two faculty members as the advisors for the freshmen, two for the sophomores, one for the juniors, and o
The students are required to participate in extracurricular activities in order to prepare themselves with not only knowledge in IE, but also Teamwork and interpersonal skills, Leadership, and Social responsibilities.
The university-level student advisor
The Bachelor program requires 173 credits, consisting of 136 credits in spring/fall semesters, 4 credits in senior projects, 18 credits in summer practice and military training, and 15 credits of a final thesis. The courses are classified into five categories: Humanities and Social Sciences, core engineering courses, core Industrial Engineering courses, summer practice and internship, and a thesis component.
International programs have been initiated since 2001 including the Tsinghua-Aachen joint master program and Tsinghua-Gatech exchange program. And a two-year, professional-orientated Master's program in Management Science and Engineering (Global Manufacturing) was founded in 2009 for students with a global vision in management science and engineering, with special focus on the manufacturing industry in China.
The doctoral degree program usually lasts 3 to 5 years. Students with Master's degree usually spend 3 to 4 years. The program has 22 credits consisting of 13 credits of core courses, and 5 credits of research requirements. Students without an IE related Master's degree shall take prerequisite courses suggested by the advisor.
Admissions to the International Program of Master of Engineering Management (iMEM)
International Journal Papers
Xinfeng He, Su Wu, Quanglin Li, Production variability of production lines, accepted, for International Journal of Production Economic, Special Issue (2006)
Zhang Xiping, Wu Su, et al, Total Logistics Cost of Year 2005 in China, China Logistics and Purchasing, No.4, 2006
Wang Jianzhao, Wu Su, Performance evaluation of expansion behavior in retailing business, Business Times (Theory version), No.21,2005
Yang fan, Wu Su, Tilo Pefeifer, Klaus Hense, Optimization of Multi-Criteria Experiments with Fuzzy Results, Tsinghua Science and Technology (English version), to be published in No.6, Dec.,2006
He Xinfeng, Wu Su, Hubert Kratz, Forces in Hard Turning of 51CrV4 with Wiper Cutting Tool, Tsinghua Science and Technology (English version), to be published in No.5, Oct., 2006
Li Haosheng, Wu Su, FFT & Wavelet-based analysis of influence of machine vibration on hard turned surface topography, accepted, Tsinghua Science and Technology
Su. Wu, Yu Wang, Haiyan. Zhao, Application of segmented bi-ellipsoid heat source model in numerical simulation of electron beam welding, Journal of Materials Processing Technology (accepted)
Su Wu, Haiyan Zhao, Lu Anli, et al, A micro-mechanism model of residual stress reduction by low frequency alternating magnetic field treatment, Journal of Materials Processing Technology, 132(2003), 198-202
Cai Zhipeng, Wu Su, Lu Anli, Zhao Haiyan, Shi Qingyu，Line Gauss heat source model: An efficient approach for numerical welding simulation, Science and Technology of Welding and Joining, 2001, Vol.6, No.2
Wu Su, Lu anli, Zhao Haiyan, Micro-mechanism of residual stress reduction by low frequency alternating magnetic field treatment, Materials Science and Engineering A , A328, 2002
Mechanical Properties and interfacial failure of dissimilar welded joint between martensite and bainite heat-resistant steel, Zhang Jianqing, Wu Su, Zhao Haiyan, Chinese Journal of Mechanical Engineering, vol.39, 2/2003
Zhang Jianqiang, Wu Su, et al, Research on the creep damage and interfacial failure of dissimilar metal between martensite and pearlite steel, Transactions of the China Welding Institution, vol.23, No.2, 2002
Cai Zhipeng, Zhao Haiyan, Wu Su, Model of string heat source in welding numerical simulations, Chinese Journal of Mechanical Engineering, vol.37, 4/2001
Wu Su, zhao Haiyan, Wang yu, A new heat source model in numerical simulation of high energy beam welding, Transactions of the China Welding Institute, vol.25, No.1, 2004
National Journal Papers
Including over 40 other journal papers and conference papers in Chinese core academic journals and academic symposium
Selected International Conference Proceedings
Li Haosheng, Wu Su, Wang Feng, Yang Yao, Optimal Pricing in Closed-Loop Supply Chain with Product Remanufacturing, Competitive advantage through Global Supply Chain, The 11th International Symposium on Logistics (ISL) 2006 (Accepted)
Lu Anli,Cai Zhipeng, Zhao, Haiyan, Wu Su, New Heat Source Models for Numerical Simulation of Welding Process: Segmented Gauss Model and Segmented String Model，6th International Seminar ‘Numerical Analysis of Weldability’, Oct.,1-3, 2001, Graz , Austria
Zhao Haiyan, Wu Su, et al, Numerical Simulation of Weld Metal Filling and Multi-layer welding in Fillet Welds，6th international seminar on numerical analysis of weldability, Austria, Oct. 1-3, 2001
Shi Qingyu, Lu Anli, Zhao, Haiyan, Wu Su, Numerical simulation of affection of pre-contacted force to welding residual stresses in welded generator rotor”, Numerical analysis of weldability, Graz-Seggau, 4-6 Oct. 1999
Lu Anli, Zhao Haiyan, Wu Su, Net-worked Manufacturing Application Service Provider, International Forum on Network Design & Manufacture, Oct.,18-19, 2000, Hangzhou, China
A study on fatigue crack closure behavior of two kinds of steels for industrial machinery, Symposium of the Second International Welding Science and Technology, 8-10, 1991.5