Hongxuan Huang-Department of Industrial Engineering, Tsinghua University

Home
Introduction
Organization
Education

Undergraduate Program Master's Program Ph.D. Program ABET ACCREDITATION

The bachelors's degree in Industrial Engineering at Tsinghua requires 170 credits totally, which include: spring & fall courses 142 credits, summer practicum 13 credits, and thesis project 15 credits. The 170 credits constitution is: General

The Master of Science degree in Industrial Engineering is offered to all students who finish the Industrial Engineering program usually in 2 years. Besides the required Master's thesis, the Industrial Engineering program requires 30 credits, con

The Philosophy of Doctor degree in Industrial Engineering is offered to all students who finish the Industrial Engineering program in at least 3 to 5 years.

PEOThe current PEO is:Employ industrial engineering theories, and analytical and management skills for incre
Research

Introduction Institute of Operations Research and Data Science Institute of System Operation and Digital Management Institute of Human Factors and Human-System Interaction Research Centers IE Laboratories

The Department of Industrial Engineering is devoted to solving efficiency, quality, cost and safety problems in industrial and service systems. The challenges in contemporary society are mostly complicated system problems, such as management of global production networks, establishment of efficient public healthcare systems, construction of traffic and transport systems and their operation networ

We apply state-of-the-art decision science and statistics knowledge to the development of the Chinese economy. To be specific, we use data-driven decision...

Human Factor and Ergonomics studies the correlations and interactions between human, tool, machine and environment in system, and promote the total productivity of human-machine system as well as people's health, security and the quality of life.

The research centers at the department are platforms for the collaboration and communication between the department and industries. They serve through research, technology transfer, management consulting, and continuous education & training. Below ar

The IE department has four laboratories: Human Factors Engineering Lab (HFEL), Logistics Engineering Lab (LEL), Production Engineering Lab (PEL), and Computing and Simulation Lab (CSL).
People

Academic Faculty Research Staff Advisory Board Honorary Professors Guest Professors Distinguished Visiting Professors Lab Engineers Post Doctorates

The department is well structured by a team of 30 highly qualified faculty members, including 7 full professors, 17 associate professors, and 6 assistant professors. The founding chaired professor and department head is Dr. Gavriel Salvendy, who is a prof

Dr. Gavriel Salvendy Chair of the Review Board
University Distinguished Professor
University of Central Florida,and President Academy of Science, Engineering and Medicine of Florida
Member of National Academy of Engineering, US

Dr Hubertus ChristPresident of VDI ( Verein Deutscher Ingenieure,Germany)Time of appointment: 2002-2008Mr. Tome LeamonVi

Professor David W. Coit, Professor Uday Kumar, Professor Ting Li

办公室职员

博士后
News

Notice News Seminars

[Time] 9:00-10:00, April 11 (Saturday), 2020 [Location] Online
Lotus Pond Rain Classroom: W141WB
ZOOM ID: 660 896 190
Tencent ID: 526 217 861
[Speaker] Dr. Luyi Yang
[Title] A Model of Queue-Scalping
Student

Introduction Undergraduate Activities Graduate Activities

The department has one associate chair as the department-level student advisory board director. The board has an undergraduate branch and a graduate branch. Each branch is formed by class advisors, class assistants, student union, Youth League, and Scienc The IE department has eight undergraduate classes (each grade has two classes of about 70 students). Also we have two faculty members as the advisors for the freshmen, two for the sophomores, one for the juniors, and o

The students are required to participate in extracurricular activities in order to prepare themselves with not only knowledge in IE, but also Teamwork and interpersonal skills, Leadership, and Social responsibilities. The university-level student advisor
Admission

Undergraduate Program Master's Program Ph.D. Program

The Bachelor program requires 173 credits, consisting of 136 credits in spring/fall semesters, 4 credits in senior projects, 18 credits in summer practice and military training, and 15 credits of a final thesis. The courses are classified into five catego

International programs have been initiated since 2001 including the Tsinghua-Aachen joint master program and Tsinghua-Gatech exchange program. And a two-year, professional-orientated Master's program in Management Science and Engineering (Global Manufactu

The doctoral degree program usually lasts 3 to 5 years. Students with Master's degree usually spend 3 to 4 years. The program has 22 credits consisting of 13 credits of core courses, and 5 credits of research requirements. Students without an IE related M

Current location: Home >> People >> Academic Faculty >> Content

Hongxuan Huang, Associate Professor

Contacts

Name: Hongxuan Huang Phone: 010-62795308 E-mail: hxhuang@tsinghua.edu.cn Fax: 010-62795308 Address: Room 513, Shun-De Building Homepage:

Biography

Dr. Hong-Xuan HUANG was born in a countryside in Henan Province, China. Usually, he thinks that he is still a countryman except for living in Beijing and not knowing how to plant corns.

Dr. Hong-Xuan received dual Bachelor degrees of Applied Mathematics and Automatic Control from Tsinghua University in 1990. Two years later, He received a Master degree of Computational Mathematics from the same university. In 1994, He obtained an opportunity to pursue his Philosophy degree of Management Engineering from School of Management, Beijing University of Aeronautics and Astronautics (BUAA). He thinks that he was lucky for receiving a Ph. D. from BUAA before he was 30 years old.

Since August in 1992, he had been working in the department of Mathematical Sciences, Tsinghua University, even though he pursued his Ph. D. during the years from 1994 to 1997. He was also lucky for meeting many friends in the city of Gainesville, which is located in Florida state of USA, while he visited the department of Industrial and Systems Engineering (ISE) and Center for Applied Optimization (CAO) in University of Florida from August, 2000 to August, 2001.

He moved to the department of Industrial Engineering (IE) from the department of mathematical sciences, Tsinghua University, in December 2004. During the past years, He is glad to have opportunities to serve for most of graduates in Graduate School of Tsinghua University from December, 2011, to July, 2015, and visit the department of Statistics in University of Wisconsin-Madison from February, 2016 to February, 2017.

Honors and Awards

The Second-best Textbook Award, Tsinghua University（2008, Mathematical Programming）
The Second-best Teaching Award, Tsinghua University（2012）
Beijing Higher Education Quality Textbook（Operations Research: Mathematical Programming, 2013）
Liu-Bin Award, Tsinghua University（2015）

Educational Background

1994.9—1997.11
Ph.D. in Management Science and Engineering, School of Economics and Management, Beihang University.

1990.9—1992.7
Master of Science in Computational Mathematics, Department of Applied Mathematics, Tsinghua University.

1985.9—1990.7
Dual Bachelor of Science in Applied Mathematics and Automatic Control, Department of Applied Mathematics, Tsinghua University.

Employment History

2017.02—Present, Department of Industrial Engineering, Tsinghua University.
2016.02-2017.02，Department of Statistics, University of Wisconsin-Madison.
2004.12—2016.02, Department of Industrial Engineering, Tsinghua University.
2001.08—2004.12，Department of Mathematical Sciences, Tsinghua University.
2000.08—2001.08，Department of Industrial and System Engineering and Center for Applied Optimization, University of Florida.
1992.08—2000.08，Department of Applied Mathematics(Mathematical Sciences), Tsinghua University.

Courses

Advanced Operations Research（Integer Programming）, Fall Semester（2017-2020）
Operations Research I (Deterministic Methods), Fall Semester（2017,2018）
Operations Research I(Deterministic Methods), Spring Semester, 2006~2010
Advanced Operations Research(Convex Analysis and Optimization), Fall Semester, 2007~2009
Logistics System Practice(Part I and Part II), Summer Semester(Internship of Undergraduates),2005~2009
Introduction to Control Engineering, Spring Semester, 2007
Operations Research, Spring Semester, 2007
Data Structure and Algorithms, Spring Semester, 2006
Applied Statistics, Fall Semester, 2005
Algorithms and Complexity Analysis, Spring Semester, 2005
Mathematical Programming, Spring Semester, 2005(For math 21-23)
Methods in Optimization, Fall Semester, 2004
Topics in Optimization (part II), Spring Semester, 2004
Mathematical Programming, Spring Semester, 2004
Topics in Optimization (part I), Fall Semester, 2003
Calulus (Leverl 2), Fall Semester, 2003
Mathematical Programming, Spring Semester, 2003
Mathematical Experiments, Spring Semester, 2003
Methods in Optimization, Fall Semester, 2002
Mathematical Programming for undergraduates from Feb, 2002 to Jun, 2002
Optimization Theory and Algorithms for graduates from Feb, 2002 to Jun, 2002
Calculus (Level I), Fall Semester, 2001
Mathematical Experiments, Spring Semester, 2000

Students

2020，Yumeng Ma（B.S.）、Liang Yang（B.S.）、Ruijia Chen（M.S.）、Mengyue Wang（Ph.D.）
2019，Ruilong Yue（B.S.）、Aowen Zhang（B.S.）、Lei Li（M.S.）、Jingzhi Chu（M.S.）
2018，Ziyu Jiang（B.S.）、Chengyi Cao（B.S.）、Roger-Michel Launay（M.S.）、Yunhui Chu（M.S.）、Peng Lv（M.S.）
2017，Yijia Ran（B.S.）、Guangyu Wu（B.S.）、Zhe Li（M.S.）、Xi Wu（M.S.）
2015，Dongping Yu（M.S.）、Fu Zhang（M.S.）
2013，Na Fan（M.S.）、Ruishi Sui（M.S.）
2012，Shenghe Jia（B.S.）
2011，Yujie Zhao（B.S.）、Renyu Feng（M.S.）、Xuxin Zhang（M.S.）、Jinyong Zhang（M.S.）
2010，Xinxin Liu（B.S.）、Junwei Deng（M.S.）
2009：Fang Xu（B.S.）, Shengyu Qiu（B.S.）, Chunyan Guo（M.S.）, Jiaojiao Zhao（M.S.）, Peng Xiao（M.S.）
2008：Renyu Feng（B.S.）, Zhigang Wang（M.S.）, Qizhi Shang（M.S.）, Yufeng Tang（M.S.）
2007：Chunjing Wang（B.S.）, Bin Xu（B.S.）, Min Wu（M.S.）, Ziliang Zhang（M.S.）, Lingling Peng（M.S.）
2006: Zhe Li（B.S.）, Mengying Fu（B.S.）, Xiaoxuan Wu（B.S.）, Yu Zhao（M.S.）
2005: Chen Chen（B.S.）
2004: Changjun Wang（B.S.）, Junhua Zhang(B.S.), Kunliang Yao(B.S.)

Research Interests

Operations Research: Modeling, Analysis and Applications;
Global Optimization and Its Applications;
Computer Simulation and Simulation Optimization；
Supply Chain Finance.

Research Projects

·Study on the Core Courses of Professional Degree for Master of Engineering Management：Quantitative Analysis（2019.04-2021.09）,Center for Education of Master of Engineering Management, Tsinghua University（Co-PI）.
·Design of Problems-oriented Textbook about Fundamental Theory of Optimizations（2017.09-2019.07）,Office of Academic Affairs, Tsinghua University.
·Methods of Statistics and Optimization in Global Supply Chain Management（2016.02-2017.02）, China Scholarship Council.
·Real Option Pricing and Bargaining Game Methods for Overseas Mergers and Acquisitions（2015.03 – 2015.10）, Chengzhi Shareholding Co. Ltd.
·Study on Necessity and Feasibility of Social Practice in Training Program of Graduates（2014.01-2015.12）,Beijing Municipal Education Commission.
·Study on Representative Data Selection, Statistical Modeling, Optimization and Algorithm Evaluations for Validations（2011.07-2011.12）, Siemens Aktiengesellschaft, and Siemens Ltd. China.
·Bilingual Teaching Presentation for the Course of Operations Research（2010.07-2014.06）, Ministry of Education, China（Co-PI）
·Supply Chain Management Theory and Methods Based on Behavioral Operations Research（2010.1-2014.12）,National Natural Science Foundation of China（Co-PI）.
·Theory and Application of Conic Programming with Non-negative Quadratic Functions（2011.01-2014.12）,Office of Scientific R&D,Tsinghua University（Co-PI）.
·Formal Modeling and Automatic Verification for Programmable Embedded Systems（2010.01-2012.12), National Natural Science Foundation of China（Co-PI）.
·Modeling Techniques and Signal Processing Methods for Complex Systems Based on Optimization Principle（2010.07 – 2012.06), Tsinghua National Laboratory for Information Science and Technology（Co-PI）.
·Micro-Vehicles Simulation Methods Based on Multi-Agent Technology for the researches on traffic safety（2010.07–2012.06）, State Key Laboratory of Automotive Safety and Energy（Co-PI）.
·Higher Education Quality Construction about the Course of Operations Research（2008.06-2013.05）, Beijing Municipal Education Commission（Co-PI）.
·Study on Dormitory Plan for Undergraduates and Graduates (2008.12-2009.04), supported by Property Management Center of Tsinghua University.
·Study on Automatic Routing Engine for One Pipe Routing (2006.10–2007.03), supported by Mitsubishi Heavy Industries, Ltd（Co-PI）.
·Study on Optimization Problems Related to Protein Folding (2003.01–12/05), supported by National Natural Science Foundation of China.
·Study on Minimization Methods for Non-Convex Functions (2002.7-2004.07), supported by Scientific Foundation for Returned Overseas Chinese Scholars, Ministry of Education.
·Reformation of Graduate Course Methods in Optimization(course no. 60420194) in Tsinghua University (2002.10/02–2006.6), supported by Graduate Affairs Office of Tsinghua University.

Journal Papers

1. Wang, M.Y., Huang, H.X., and Li, J.S, Transients in Flexible Manufacturing Systems with Setups and Batch Operations: Modeling, Analysis, and Design. IISE Transactions, 2021, 53(5): 523-540. DOI: 10.1080/24725854.2020.1766728

2. Wang, M.Y., Huang, H.X., and Li, J.S, Transient Analysis of Multiproduct Bernoulli Serial Lines With Setups. IEEE Transactions on Automation Science and Engineering, 2020, 18(1): 135-150.

3. Wang, M.Y., and Huang, H.X., The Design of a Flexible Capital-constrained Global Supply Chain by Integrating Operational and Financial Strategies. Omega, 2019, 88: 40-62.

4. Huang, H.X., and Zhang, Z.J., Virtual Standard Currency for Approximating Foreign Exchange Rates. International Journal of Electronic Commerce, 2019, 23(1): 33-62.

5. Huang, H.X., and Zhang, Z.J., An Intrinsic Robust Rank-one-approximation Approach for Currency Portfolio Optimization. Quantitative Finance and Economics, 2018, 2(1)：160-189.

6. Long, D.W., Huang, H.X., Wang, M.Y., and Yang, Y. S. (2016). Transaction Prices of Overseas Mergers and Acquisitions with a Redemption Provision, Journal of Tsinghua University (Science and Technology), 58(8): 851-859.

7. Long, D.W., Huang, H.X., Wang, M.Y., and Yang, Y. S. (2015). Study on Pricing of Intangible Assets for Overseas Merger and Acquisition via Two Phases’ Real Option, Review of Investment Studies, 34(12): 75-86.

8. Li, Z.F., Zhang, X. P., and Huang. H.X.(2014). Effectiveness of Social Practices in Tsinghua University’s Doctorate Cultivation, Academic Degrees and Graduate Education, Issue 6, pages: 23-27. (In Chinese)

9. Qian, T., Huang, H.X., and Xing, Y.B. (2014). The Three Dimensional Training System Modeling for Talents of Graduates, Beijing Education, Issue 11, pages: 55-57. (In Chinese)

10. Huang, H.X.(2013). Graduates Training System Modeling Based on Overall Development of Students, Beijing Education, Issue 9, pages: 35-36. (In Chinese)

11. Huang, H.X., T. Qian, B.C. Lu, and Z. Deng. (2013). Study on Classification of Graduates Characteristics and Their Relevance, Tsinghua Journal of Education, supplement issue, pages:55-61. (In Chinese)

12. Liu, X.X., Huang, H.X. (2011). Study on Talents Education Evaluation System of Industrial Engineering, Journal of Changchun Normal University(Natural Science), 30(6): 17-22. (In Chinese)

13. Liu, X.X., Huang, H.X. (2011). Discussion on the Evaluation System for Innovative Talent Cultivation of Industrial Engineering, Vocational and Technical Education, 32(35): 56-60. (In Chinese)

14. Huang, H.X., & Zhao, Y. (2007). A Hybrid Global Optimisation Algorithm Based on Locally Filled Functions and Cluster Analysis, International Journal of Computational Science and Engineering, 3(3): 194-202.

15. Zhao, Y., & Huang, H.X., Modified hybrid optimization algorithm based on locally filled functions, Journal of Tsinghua University(Philosophy and Social Sciences). 47(9): 1516-1520. (In Chinese).

16. Huang, H.X., Pardalos, P.M., & Prokopyev, O.A. (2006). Lower Bound Improvement and Forcing Rule for Quadratic Binary Programming, Computational Optimization and Applications, 33(2-3), pp. 187-208.

17. Prokopyev, O.A., Huang, H.X., & Pardalos, P.M. (2005). On Complexity of Unconstrained Hyperbolic 0-1 Programming Problems, Operations Research Letters, 33(3), pp. 312-318.

18. Huang, H.X., Liang, Z.A., & Pardalos, P.M. (2004). Flow Search Approach and New Bounds for the m-Step Linear Conjugate Gradient Algorithm, Journal of Optimization Theory and Applications, 120(1), pp. 53-71.

19. Liang, Z.A., Huang, H.X., & Pardalos. P.M. (2003). Efficiency Conditions and Duality for a Class of Multiobjective Fractional Programming Problems, Journal of Global Optimization, 27(4), pp. 447-471.

20. Huang, H.X, Liang, Z.A., & Pardalos, P.M. (2003). Some Properties for the Euclidean Distance Matrix and Positive Semidefinite Matrix Completion Problems, Journal of Global Optimization, 25(1), pp. 3-21.

21. Huang, H.X., and Pardalos, P.M. (2002). A Multivariate Partition Approach to Optimization Problems, Cybernetics and System Analysis, 38(2), pp. 265-275.

22. Huang, H.X., Pardalos, P.M., & Shen, Z.J. (2002). Equivalent Formulations and Necessary Optimality Conditions for the Lennard-Jones Problem, Journal of Global Optimization, 22, pp. 97-118.

23. Huang, H.X., Pardalos, P.M., & Shen, Z.J. (2001). A Point Balance Algorithm for the Spherical Code Problem, Journal of Global Optimization, 19(4), pp. 329-344.

24. Huang, H.X., and Pardalos, P.M.(2001). New Algorithm for the Conical Combination Representation Problem of a Vector, Journal of Optimization Theory and Applications, 2001, 109(3), pp. 495-519.

25. Liang, Z.A., Huang, H.X., & Pardalos, P.M. (2001). Optimality Conditions and Duality for a Class of Nonlinear Fractional Programming Problems, Journal of Optimization Theory and Applications, 110(3), pp. 611-619.

26. Xu, Z., Huang, H.X., Pardalos, P.M., & Xu, C.X. (2001). Filled functions for unconstrained global optimization, Journal of Global Optimization, 20(1), pp. 49-65.

27. Huang, H.X., and Xie, J.X. (2001). Some Ideas on the Moral Education for Students, Journal of Tsinghua University(Philosophy and Social Sciences). 16(S1): 16-20. (In Chinese)

28. Huang, H.X., and Feng, Y.C. (1998). Job sequence perturbation analysis algorithm for Job Shop scheduling problem, Journal of Tsinghua University(Science and Technology), 38(11), pp. 125-128. (In Chinese)

29. Huang, H.X., and Feng, Y.C. (1998). Performance analysis of GI/G/n queueing system with variable number of service channels, Journal of Tsinghua University(Science and Technology), 38(6), pp. 12-15. (In Chinese)

30. Huang, H.X., Han, L.M., & Feng, Y.C. (1998). Performance gradient estimation for M/G/1 queueing system using Nonstandard Analysis, Journal of Beijing University of Aeronautics and Astronautics, 1998, 24(3), pp. 327-330. (In Chinese)

31. Han, L.M., Huang, H.X., & Feng, Y.C. (1998). Job Shop scheduling by simulated annealing algorithm combined with tabu search, Journal of Beijing University of Aeronautics and Astronautics, 24(1), pp. 75-78. (In Chinese)

32. Huang, H.X., Xu, W.J., & Feng, Y.C. (1997). Optimization via simulation in discrete event systems, Computer Simulation, 14(2), pp. 3-9. (In Chinese)

33. Xu, W.J., Huang, H.X., & Feng, Y.C.(1997). Efficiency of finite perturbation analysis of DEDS, Systems Engineering: Theory and Practice, 17(7), pp. 83-87. (In Chinese)

34. Huang, H.X., Xu, W.J., & Feng, Y.C. (1996). GSMP formalism and perturbation analysis for discrete event dynamic systems, Journal of Beijing University of Aeronautics and Astronautics, 22(6), pp. 752-756. (In Chinese)

35. Xu, W.J., Huang, H.X., & Feng, Y.C. (1996). Aggregation of simulation and infinitesimal perturbation analysis in discrete event dynamic system, Journal of Beijing University of Aeronautics and Astronautics, 22(6), pp. 757-762. (In Chinese)

Selected Conference Proceedings

1. Huang, H.X.(2011). Several Important Issues and Approaches for Attacking on Related Problems Next Ten Years. Proceedings of The Chinese Society for Future Studies(CSFS’2011): Future of China in the transition period,beijing, China, June, 42-48, 2011.

2. Huang, H.X., and Wang, C.J (2005). Distance Geometry Problem and Algorithm Based on Barycentric Coordinates, In Li, T.T., and Zhang, P.W. (Ed.) Frontiers and Prospects of Contemporary Applied Mathematics, Series in Contemporary Applied Mathematics(CAM 6), Beijing: Higher Education Press.

3. Huang, H.X., and Feng, Y.C. (1998). Perturbation/Insertion Analysis and Its Application in Job Shop Scheduling Problem, Proceedings of the 3rd International Conference on Management (ICM'98), Shanghai, China, July 25-28, 1998.

Books

1. Huang, H.X. (2011). Operations Research: Mathematical Programming, Beijing: Tsinghua University Press. (In Chinese)

2. Huang, H.X. (2009). Global optimization: Filled function methods, In Floudas, C.A., and Pardalos, 3. P.M. (Ed.) Encyclopedia of Optimization, 2nd Edition, Springer, Netherlands, pp. 1316-1323.

Chinchuluun, A., Pardalos, P.M. and Huang, H.X.(2009). Multilevel (Hierarchical) Optimization: Complexity Issues, Optimality Conditions, Algorithms, In Gao, D. and Sherali, H.(Ed.) Advances in Applied Mathematics and Global Optimization(Series: Advances in Mechanics and Mathematics, Vol.17), Springer, pp. 197-221.

4. Huang, H.X., and Han, J.Y. (2006). Mathematical Programming, Beijing: Tsinghua University Press. (In Chinese)

5. Horst, R., Pardalos, P.M., and Thoai, N.V. (2006). Introduction to Global Optimization, Translated by H.X. Huang, Beijing: Tsinghua University Press. (In Chinese)