Current location: Home >> People >> Academic Faculty >> Content

Li Zheng, Professor

Contacts

Name: Li Zheng Phone: +86-10-6278-5584 E-mail: lzheng@tsinghua.edu.cn Fax: +86-10-6279-4399 Address: Room North 506A, Shunde Building, Tsinghua University Homepage: www.ie.tsinghua.edu.cn/~zhengli

Biography

Li Zheng received the B.S. and PhD. degree from Tsinghua University, China, in 1986 and 1991, He is currently an Professor in the Department of Industrial Engineering, Tsinghua University, China. He was a visiting Professor in Georgia Tech during 1994 – 1996. He has authored/coauthored over 200 publications, and Five book chapters. His research interests include production and operation planning and scheduling, production system analysis and information Driven manufacturing. He won several important award, such as, the National Science and Technology Progress Award in 2005, the National Invention Award in 1990, Excellence Young Faculty Award from MOE in 2000. Dr. Zheng is a member of the Institute of Industrial Engineers (IIE) and founding chair of IIE, China Chapter.

Honors and Awards

2005: National technology progress award (the first class, rank: 8)
2003: Outstanding faculty award, Tsinghua University
2003: Beijing “5.4” medalist, Beijing Municipal government
2003: “Best adviser award”, voted by graduate students
2003: Best paper award, Chinese society of mechanical engineering
1997: Technology progress award(the third class, rank: 7), MOE
1996: Outstanding teacher award (the first class), Tsinghua University
1992: Outstanding teacher award (the second class), Tsinghua University
1990: National invent award(the fourth class, rank: 4)
   

Educational Background

Department of Precision Instruments and Mechanology, Tsinghua University, China, 1991
Doctor of Philosophy in Mechanical Engineering, Manufacturing Program
Department of Precision Instruments and Mechanology, Tsinghua University, China, 1988
Master of Science in Mechanical Engineering, Manufacturing Program
Department of Precision Instruments and Mechanology, Tsinghua University, China, 1986
Bachelor of Science in Mechanical Engineering, Manufacturing Program    

Employment History

2005. 03 - Present:  Professor, Executive Head, Dept. of Industrial Engineering, Tsinghua University
2004. 12 - 2005. 03:  Visiting Scholar, Aachen Univ. of Technology, Germany
2001. 09 - 2004. 12:  Professor, Executive Head, Dept. of Industrial Engineering, Tsinghua University
1999. 02 - 2001. 09:  Professor, Director, Institute of Manufacturing Engineering, Dept. of Precision Instruments, Tsinghua University
1997. 09 - 1999. 09:  Professor,  Associate Director, Institute of Manufacturing Engineering, Dept. of Precision Instruments, Tsinghua University
1996. 02 - 1997. 09:  Associate Professor, Associate Director, Institute of Manufacturing Engineering, Dept. of Precision Instruments, Tsinghua University
1994. 02 - 1996. 02:  Visiting Professor,  School of Mechanical Engineering,  Georgia Tech, USA
1993. 09 - 1994. 02:  Associate Professor, Division of Robotics, Dept. of Precision Instruments, Tsinghua University
1991. 03 - 1994. 02:  Assistant Professor, Division of Robotics, Dept. of Precision Instruments, Tsinghua University    

Courses

Introduction to Industrial and System Engineering
Manufacturing System: Modeling and Design
Manufacturing Technology
Systematic Engineering Design
Computer integrated manufacturing
Monitoring Technology and Quality control    

Research Interests

Production System analysis and design
Production Planning and scheduling
Information driven manufacturing
Computer aided process planning
Modeling and Simulation of machining process    

Research Projects

1. Information Driven Manufacturing:
MIS for Maintenance warehouse, Industrial project, 2006, 300K  (PI)
Information Platform for modern Distribution, Beijing municipal government, 2005-2006, 1.5M  (PI)
Information System for railway Marshall Scheduling, MOR project, 2005-2006, 200K  (PI)
Product and Process Data Management System, Industrial project, 2003-2004, 150K  (PI)
Web based collaborative process planning and Manufacturing date management, National High Technology program, 2002-2004, 400K  (PI)
Software design and evaluation for ATM, Industrial project, 2002-2003,270K  (PI)
Manufacturing Executing System for QingChuang Company, Industrial project, 2001-2002, 250K  (PI)
Virtual Product Developing System: Virtual Machine tools, Industrial Project, 1999-2001, 2.6M  (PI)
Network based agile Manufacturing, 985 MOE project, 1998-2001.2, 11.5M  (PI)
Enabling Technology for Agile Manufacturing system, NSFC key project, 1997-2000, 1.0M  (PI)
Technology Enabling Agile Manufacturing, 863 High tech program, 1997-1998, 300K  (PI)


   2. Production System Engineering:
WIP reduction for CPU factory, Intel-shanghai, 2006, US$20K  (PI)
Production Modeling & Scheduling, Intel-shanghai, 2005, US$20K  (PI)
Intelligent Scheduling by using Reinforce learning algorithm , National Scicence Foundation of China, 2004-2006, 260K  (PI)
Advanced Planning/Scheduling in Assembly/Test Manufacturing, Intel-shanghai, 2004, US$30K  (PI)
Design and optimization of logistics system for effective distribution, Beijing municipal government, 2002-2003, 1.0M  (PI)
Advanced Manufacturing System: Design and Optimizaton, National Technology improvement program, 2002-2003, 800K  (PI)
Reverse logistics: model and simulation, Ph. D foundation, 2002-2004, 40K  (PI)
Simulation Based Analysis for Automobile Production System, MoE Project, 1998-2001, 3.0M  (PI)


   3. Advanced Manufacturing Technology:
Packing Optimization, Caterpillar, 2005, US$10K  (PI)  
Cutting force prediction and  machining process optimization, Rolls-Royce Corp., 2002-2003,US$14K  (PI)
Research on Manufacturing Process of Ring Gauge, Industrial project,  2001-2003, 200K  (PI)
Virtual Design for helmet, Industrial Project, 2000-2002, 600K  (PI)
Accuracy Compensation for heat extension in a Machining Center, Industrial project, 2000-2001, 200K  (PI)
Virtual Cutting: Model Based Simulation, NCFC, 1998-2000, 150K  (PI)
Cutting tool Monitoring for Turning Center, MOM project, 1991-1995  (Co-PI)
Monitoring the Turning Process, MOM project, 1986-1990  (PI: Prof. BP Zhang)
   

Journal Papers (International)

  1. A study on calibration of coefficients in end milling forces model，Zhang, Zhihai; Zheng, Li; Zhang, Lei; Li, Zhizhong; Liu, Dacheng; Zhang, Bopeng，International Journal of Advanced Manufacturing Technology, v 25, n 7-8, April, 2005, p 652-662

  2. Prediction of cutting forces in end milling of pockets， Zhang, Lei; Zheng, Li Source: International Journal of Advanced Manufacturing Technology, v 25, n 3-4, February, 2005, p 281-287

  3. On the prediction of chip flow angle in non-free oblique machining，Wen, D.H.; Zheng, L.; Li, Z.Z.; Hu, R.S. Source: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, v 218, n 10, October, 2004, p 1267-1278

  4. Prediction of cutting forces in milling of circular corner profiles, Zhang, Lei (Sch. of Mech. Sci. and Engineering, Nanling Campus, Jilin University); Zheng, Li Source: International Journal of Machine Tools and Manufacture, v 44, n 2-3, February, 2004, p 225-235

  5. An improved chip flow model considering cutting geometry variations based on the equivalent cutting edge method, Wen, D.H. (Department of Industrial Engineering, Tsinghua University); Zheng, L.; Li, Z.Z.; Hu, R.S. Source: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, v 217, n 12, 2003, p 1737-1745

  6. A solid model-based milling process simulation and optimization system integrated with CAD/CAM，Li ZZ, Zheng M, Zheng L, Wu ZJ, Liu DC, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY ，138: 513-517 Sp. Iss. SI JUL 20 2003

  7. An investigation of cutting forces in horizontal-mode peripheral milling of curved surfaces，Zhang L, Zheng L, Zhang ZH，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE，217 (7): 961-976 2003

  8. A cutting force model for a waved-edge end milling cutter，Zhang Z, Zheng L, Li Z, Liu D, Zhang L, Zhang B，INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY，21 (6): 391-396 2003

  9. On cutting forces in peripheral milling of curved surfaces，Zhang L, Zheng L, Zhang ZH, Liu Y, Li ZZ，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE，216 (10): 1385-1398 2002

  10. On the removal of material along a polishing path by fixed abrasives，Zhang L, Tam HY, Yuan CM, Chen YP, Zhou ZD, Zheng L，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE，216 (9): 1217-1225 2002

  11. E-DREAM: A web-based platform for virtual agile manufacturing，Tang DB, Zheng L, Chin KS, Li ZZ, Liang YL, Jiang XJ, Hu CJ，CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS，10 (2): 165-183 JUN 2002

  12. STEP-based Product Modeling for Concurrent Stamping Part and Die Development, Dunbing Tang, Li Zheng, Zhizhong Li, Computers in Industry, 2001.8, Vol. 46, Iss. 1; pg. 75

  13. An intelligent feature-based design for stamping system, Dunbing Tang, Li Zheng, Zhizhong Li,  International Journal of Advanced Manufacturing Technology, 2001 Volume 18, Issue 3, pp 193-200

  14. Re-engineering the design process for concurrent engineering, Dunbing Tang, Li Zheng, Zhizhong Li, et al.,Computers & Industrial Engineering, 2000,38(4), 479-491

  15. End Milling System Compliance and Machining Error, Machining Science and Technology, Liang, Steven; Zheng, Li, Vol.2,No.1, 1998

  16. Analysis of End Milling Surface Error Considering Tool Compliance, Liang, Steven; Zheng, Li, Transaction of ASME, J. of Manufacturing Science and Engineering, Vol.120, No.1, 1998

  17. Gerneralized Model of Milling Forces, Zheng, LI; Liang, Steven, Int. J. of Advanced Manufacturing Technology, Vol.14, No.3, 1998

  18. Angle Domain Analytical Model for End Milling Forces, Zheng, LI; Liang, Steven, Transaction of ASME, J. of Manufacturing Science and Engineering, Vol.120,No.2, 1998

  19. Identification of Cutter Tilt in End Milling, Zheng, LI; Liang, Steven, Transaction of ASME, J. of Manufacturing Science and Engineering,Vol.119,No.2,1997

  20. Three Dimensional Cutting Force Analysis in End Milling, Zheng, LI; Liang, Steven,  International Journal of Mechanical Science,1996/5,Vol38, No.5


 Selected Journal Papers (Domestic, in Chinese)

  1. The Yard-Controller Decision Making Support System in Technical Station based on Agent, ZD HE; L. ZHENG; ZH ZHANG; SD WANG; SC LIU, Railway Transport and Economy,2006.3

  2. Design and Implementation of Agent-based Holonic Control System, P. ZHAO; L. ZHENG; DC LIU, MX PANG, Manufacturing Technology & Machine Tool, 2006-02

  3. Ant colony optimization for the single machine early or tardy problem with distinct ready times, Y. SONG; ZH ZHANG; L. ZHENG, Journal of Tsinghua University(Science and Technology), 2005.11

  4. EDM system design for Collaborative Design AmongEnterprises, XQ Yu, ZH Zhang, L. Zheng, CJ Hu, Computer Engineering and Application, 2005.10

  5. Design in Large-scaled Logistics Networks Based on Combinatorial Genetic Algorithm, Q. TIAN; LX MIAO; L. ZHENG; ES QI, Logistics Technology, 2005.6

  6. Remote Video Signal Process by using the effectiveness of monitoring information, CIMS, 2005.3

  7. Process Based Performance Matrix for Manufacturing Industries, JR Zhu, DC LIU, W. Dong, L. Zheng, CIMS, 2005.3

  8. Extracting Geometry Features in Ball End Milling Process Simulation, Y. Liu, ZZ Li, ZH Zhang, L. Zheng, Journal of Tsinghua Univesity, 2005.2 

  9. A Reliability Evaluation Method Based on failure date and statistics, YH Yang, ZZ Li, L. Zheng, Journal of System simulation, 2004.12

  10. Design Methodology for Logistics Network by Using GA, Q. Tian,  LX Miao, L. Zheng, Journal of Tsinghua University, 2004.11

  11. Optimizing the Production Plan in Semiconductor Manufacturing, Q. Li, DC Liu, HZ Wang, L. Zheng, Manufacturing Technology and Machine Tool,  2004.11

  12. Situation on Grid Research and Its Application in Manufacturing, B Yan, BQ Huang, L Zheng, TY Xiao, CIMS   2004.09

  13. Analytical model to predict milling forces for arc curved surfaces, ZH Zhang, L. Zheng, L. Zhang, ZZ Li, Journal of Tsinghua University(Science and Technology), 2004.08

  14. LP-based capacity planning in semiconductor manufacturing, Q LI; DC LIU; L. ZHENG; T. ZHANG, Semiconductor Technology, 2004.07

  15. Research on Spares Management System with Simulation, YH Yan, JM Zhao, ZZ Li, L. Zheng, Acta Simulata Systematica Sinica, 2004.05

  16. Solution framework for the large scale vehicle delivery/collection problem, ZW QU; LN CAI; C. LI; L. ZHENG, Journal of Tsinghua University(Science and Technology), 2004.5

  17. A Study on a Integrated Framework of Information Modeling and Re-engineering for Design Process, CJ Hu, L. Zheng, ZZ Li, DB Tang, BP Zhang, China Mechanical Engineering,  v 14, n 20, 2003.10

  18. Wavelet-based fast modification of the free form surface of a soldier's helmet, Zhou, Hong; Li, Zhizhong; Jing, Yue; Liu, Hong; Zheng, Li; Huang, Xiancong; Bao, Yuanhui; Chen, Xiao, Journal of Tsinghua University, v 43, n 8, August, 2003

  19. Industrial Engineering in the New Millennium, G. SALVENDY, L. ZHENG, XB ZHAO, Industrial Engineering and Management, 2002.03

  20. A Web Based Agile Turning Parameter Planning System, XM Yang, L. Zheng, ZH ZhangXL Han, BP Zhang, China Mechanical Engineering, Vol.12, No.6, 2001.3

  21. A Raference Framework for Concurrent Engineering, DunbingTang, Li Zheng, Zhizhong Li, Dacheng Liu, Hign Technology Letters, 2001, vol.7, No.1, pp.47-50

  22. Virtual Machining Process: Concept, Method And Its Application, L. Zheng, DC Liu, ZZ Li, BP Zhang, CHINA MECHANICAL ENGINEERING, 1999.09


 Selected Conference Proceedings

  1. Zhang Lei, Zheng Li, Zhang Zhihai. Numerical model for cutting forces in peripheral milling of curved surfaces. Proceedings of IE&EM’2002 & IceCE’2002, Sept.19-21, 2002, Beijing, China.

  2. Gao Benhe, Zheng Li,et al. A Research to the Stress Model of the Non-completely Chip-breaking in Vibration Drilling. Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, July, 2002, Printed by DUT Printing House, Dalian, China: 263~269.

  3. Gao Benhe, Liu Dacheng, et al. Management Research and apply of the Quality Assurance System in CIM Environment, Proceedings of IE&EM'2002 and IceCE'2002, September, 2002, Tsinghua University Press, Beijing, China.

  4. Zhao Daquan, Zheng Li, Liu Dacheng: The Application of Fuzzy Cluster Analysis in Identification of Characteristic Temperature in Machine Tool (RID: 265), Proceedings of IE&EM' 2002 and IceCE' 2002

  5. Niansong ZHANG, Dacheng LIU,Li ZHENG, Bopeng ZHANG. Resource Recycling Strategy of the Household Refrigerators. Proceedings of IE&EM 2002, Sept. 19-21, 2002, Beijing, China.RID108.

  6. Liu Shaogang, Zheng Li,  Liu Dacheng, Li Zhizhong. Fixture Selection under Fuzzy Environment. Proceedings of IE&EM 2002, Sept. 19-21, 2002, Beijing, China.

  7. Liu Shaogang, Zheng Li,  Zhang Zhihai. A Fuzzy Multiple Attribute Decision-making Approach for Supplier Selection. Proceedings of IE&EM 2002, Sept. 19-21, 2002, Beijing, China.

  8. Hu Changjian, Li Zhizhong , Zheng Li, Zhang Bopeng. A Virtual Clustering Mechanism for Agent, Proceeding of IE&EM'2002 and IceEM'2002. Sept. 19-21, 2002, Beijing, China.

  9. Yin Liu, Li Zheng,The research on the extraction method of cutting engagement in ball-end milling simulation(Rid 264), Proceeding of IE&EM'2002 and IceEM'2002. Sept. 19-21, 2002, Beijing, China. pp175　　　　　　　　

  10. Pan Chunfeng, Liu Dacheng, Lu Jun, Cheng Lihui, Zheng Li. An Application of Web-based Remote Monitor System. Proceedings of IE&EM’2002 & IceCE’2002, Sept.19-21, 2002, Beijing, China

  11. Li Zhizhong, Zheng Li, Tang Dunbing, Hu Changjian, Liu Dacheng, Li Litao. Interoperable Software Component of a Rule-Based Inference Engine for Product Development Decisions. 1st International Conference on Mechanical Engineering, Nov. 20-22, 2000, Shanghai

  12. Li Zheng, Dunbing Tang, Zhizhong Li, “Web-based Technologies Enabling Agile Manufacturing”, International conference on eCommerce Engineering: New Challenges for Global Manufacturing in the 21st century (ICECE’21), Xi’an, Sept. 2001

  13. ZHAO Daquan, LIU Dacheng, ZHENG Li, LI Zhizhong, ZHANG Bopeng, XIANG Weihong. Determining thermal restraints exactly in analysis of thermal deformations of machine tool. Proceedings of the Ninth International Manufacturing Conference in China. August 16-17, 2000. Hong Kong. P.R.C.

  14. Yanbo LIU, Dacheng LIU, Li Zheng, Ruying Pang. Automatic meters reading system of PSTN-based telecommunication. Proceedings of ICeCE 2001.2001 International Conference on eCommerce Engineering: New Challenges for Global Manufacturing in the 21st Century. RID04-30.Sept.16-18, 2001. Xi'an, P.R.China.

  15. Pang Ruying, Liu Dacheng, Zheng Li. The construction of Web-based electronic product catalogs system. Proceedings of ICeCE 2001.2001 International Conference on eCommerce Engineering: New Challenges for Global Manufacturing in the 21st Century. RID04-28.Sept.16-18, 2001. Xi'an, P.R.China.

  16. LI Zhizhong, ZHENG Min, ZHENG Li, WU Zhijun, LIU Dacheng. A Solid Model-Based Milling Process Simulation and Optimization System Integrated with CAD/CAM. Proc. Of IMCC'2000. 2000. HongKong.


 Books

  1. Introduction to Standardization, CT LI ed. Chapter 16: Standardization and Mass customizations (in Chinese), 2005, People’s University Press

  2. Li Zheng et al (Ed), "Strategic Production Network", Springer-Verlag, Berlin, Germany 2002

  3. Li Zheng, DC Liu, ZZ Li, Virtual Manufacturing  in Handbook of Modern Instrument, Science Press (in Chinese), 2003

  4. BP Zhang, Li Zheng, et al, Advanced Manufacturing Technology, Post Press(in Chinese), 2003

  5. Li Zheng, Ken Chen, BP Zhang, Manufacturing System, Tsinghua University Press(in Chinese), 2001


13615

Department of Industrial Engineering, Tsinghua University
Phone： 010-62772989
Fax：010-62794399
E-mail：ieoffice@tsinghua.edu.cn
Address：Shunde Building, Tsinghua University, Beijing 100084


Copyright © 2014-2024 Department of Industrial Engineering, Tsinghua University